Topcoat

Enduragloss Water Based Acrylic - SU1009

Enduragloss WB is an outstanding alternative for conventional Gloss Enamel.  Almost odourless and dries quickly, especially suited for surfaces where high wash and burnish resistance is needed.

 
 
Product Rating:

Data

Product Code: SU 1009
Application: Roller & Brush
Appearance: High-Gloss
Spread Rate: 10-12 m2/l per coat @ 35µm, DFT
Packaging: 1L, 5L & 20L
Colours: White, Base: Pastel - Clear
Guarantee: 15 years

Tools & Resources

Download Data Sheet  |  Download MSDS  |  Paint calculator  |  Get Adobe Reader
Please note, downloads may be blocked by popup blockers

Description

  • Suitable for application to new concrete, plaster or asbestos cement.  No primer required but recommended to ensure stability. Also suitable for direct application to previously painted surfaces; enamel surfaces must preferably be sanded down lightly before application.
  • Can be applied to wood and metal surfaces provided that these surfaces have been prepared properly and painted with a quality primer. It yields a gloss finish which is appropriate for interior and exterior use

Features

  • Adds a dimension to acrylic gloss, never before achieved in the market.
  • Impa Enduragloss is unique because it yields a water-base High-Gloss finish, which will not yellow or fade as in the case of traditional Alkyd High-Gloss Enamel finishes.
  • It has outstanding flow-and coating base properties that have been created with a special rheology modifier
  • Has exceptional wear-and-tear and stain removing characteristics and does not leave any vague spots once the surface has been washed.
  • Easy application through the use of a brush, roller or spray gun and dries quickly, therefore, two coats can be applied within a day.
  • As an exceptional adhesion capacity, which facilitates the over coating of old alkyd surfaces such as Eggshell and High Gloss.
  • As a result of high pigmentation, it has an exceptional spreading rate, which may lead to savings on labour and material, while care has been taken to ensure film build.
  • The product is water-based, dilution of paint and the cleaning of equipment performed at low cost.
Disclaimer: The technical information contained in this document is given in good faith and is meant to be used as a guideline by the specifier or user. Whilst we are confident about the quality of our products, we cannot accept any liability for the incorrect use or application of our products. Surface preparation forms an integral part of the scope of works and it is expected that the highest standards are maintained during surface preparation and application, to ensure that our products perform as intended. Always ensure to use the same product batch numbers, refrain from doing spot touch-ups and paint surfaces from corner to corner to prevent colour and sheen variance. As technology may change over time, we reserve the right to change products to keep up with changes in raw materials or product trends without prior notice. Although we will always prevail to keep clients informed about changes to be made, we cannot bind ourselves to such notes. Please ensure the use of the latest Technical Data Sheet.