Texture Heavy

Tuftex Coarse - PR1032

Tuftex Coarse is a good quality weather resistant decorative paint with a very coarse texture that bridges hairline cracks and hides surface imperfections

 
 
Product Rating:

Data

Product Code: PR 1032
Application: Texture Roller & Brush
Appearance: Low Sheen
Spread Rate: 1.5-2m2/l per coat
Packaging: 5L & 20L
Colours: White, Colours available on minimum order
Guarantee: 10 Years

Tools & Resources

Download Data Sheet  |  Download MSDS  |  Colour Chart  |  Paint calculator  |  Get Adobe Reader
Please note, downloads may be blocked by popup blockers

Description

  • For interior and exterior use.
  • An exceptional coarse exterior finish, however, it can be used on interior walls if a coarse-structured finish or effect is required.
  • Well suited for exterior areas where an extremely durable finish is required. It is also highly suitable as a textured finish on ceilings.
  • Impa Tuftex Coarse  is based on and strengthened by mica, silica and marble aggregate

Features

  • It yields a much thicker-textured finish than conventional paints, almost three times that of IMPA TUFTEX FINE.  For this reason, one can expect the paint to have a much longer life-span.
  • It contains a typical bonding substance that promotes outstanding adhesion.
  • It is alkali resistant and yields a durable appearance to most surfaces. Easy application through use of brush or roller
  • As a result of high pigmentation, it has an exceptional coating capacity, which results in savings on labour and material. It yields a luxurious coating  with a beautiful Satin appearance with low dirt pick-up:
  • The product is water-based, therefore cleaning of equipment performed at low cost.
  • The Sheen Appearance will not fade due to weathering.
  • Ideal for bridging hairline cracks and improving the aesthetic appearance of uneven plasterwork. Also ideal for creating feature walls and paint techniques.
  • A tough coating that requires a strong substrate.
Disclaimer: The technical information contained in this document are given in good faith and are meant to be used as a guideline by the specifier or user. Whilst we are confident about the quality of our products, we cannot accept any liability for the incorrect use or application of our products. Surface preparation forms an integral part of the scope of works and it is expected that the highest standards are maintained during surface preparation and application, to ensure that our products perform as intended. Always ensure to use the same product batch numbers, refrain from doing spot touch-ups and paint surfaces from corner to corner to prevent colour and sheen variance. As technology may change over time we reserve the right to change products to keep up with changes in raw materials or product trends without pre notice. Although we will always privail to keep clients informed about changes to be made, but cannot bind ourself to such notes Please ensure the use of the latest Technical Data Sheet.