Paint Accessories

QuickFill Acrylic Crackfiller - RES1050

QuickFill is a white ready-mixed resin bound filler in paste form.  It provides tough, flexible weather resistant filling on both interior and exterior surfaces.

 
 
Product Rating:

Data

Product Code: RES 1050
Application: Paint Scraper Knife
Appearance: White Putty
Spread Rate:  0.5 m2/l
Packaging: 1L, 5L & 20L
Colours: White

Tools & Resources

Download Data Sheet  |  Download MSDS  |  Paint calculator  |  Get Adobe Reader
Please note, downloads may be blocked by popup blockers

Description

  • QuickFill is designed for filling cracks and holes in and around plaster, wood, brick, stone, concrete, stucco, metal, glass, fibre-cement and other masonry surfaces.
  • It is specifically formulated to fill cracks that might be unstable due to normal expansion and contraction as a result of temperature changes, but is not recommended for structural cracks.
  • QuickFill is also ideal for filling cracks where adhesion problems occur, e.g. the join between cornice and wall or ceiling where conventional crack fillers will fail.  The extra adhesion and flexibility of QuickFill ensures that the filler will not fall out.
  •  Other uses include the repair of glazing where old putty has cracked or fallen out and stopping of interior or exterior wood floors, fascias, etc.
  •  If it is to be used under a clear varnish, QuickFill may be tinted to the desired timber colour with iron oxides.

Features

  • QuickFill can be used straight from the tub, is slump resistant and can be applied in thick layers.
  • QuickFill is ready mixed and dries in thin layers in approx one hour, but thick fillings of 10 mm may require 24 hours (or longer e.g. in cold damp conditions) before overcoating.
  • The product dries without shrinkage.  It has good adhesion and abrasion resistance.
  •  When dry, it is weather resistant and sufficiently flexible to cope with normal temperature related expansion and contraction within the substrate without cracking
Disclaimer: The technical information contained in this document is given in good faith and is meant to be used as a guideline by the specifier or user. Whilst we are confident about the quality of our products, we cannot accept any liability for the incorrect use or application of our products. Surface preparation forms an integral part of the scope of works and it is expected that the highest standards are maintained during surface preparation and application, to ensure that our products perform as intended. Always ensure to use the same product batch numbers, refrain from doing spot touch-ups and paint surfaces from corner to corner to prevent colour and sheen variance. As technology may change over time, we reserve the right to change products to keep up with changes in raw materials or product trends without prior notice. Although we will always prevail to keep clients informed about changes to be made, we cannot bind ourselves to such notes. Please ensure the use of the latest Technical Data Sheet.