Velvet Mid Sheen - PR1188

Velvet Mid Sheen is a outstanding alternative for conventional Alkyd Eggshell Enamels

Product Rating:


Product Code: PR 1188
Application: Roller &Brush
Appearance: Mid Sheen
Spread Rate: 8 m2/l
Packaging: 1L, 5L & 20L
Colours: White, standard colours and tint bases
Guarantee: 12 Years

Tools & Resources

Download Data Sheet  |  Download MSDS  |  Colour Chart  |  Paint calculator  |  Get Adobe Reader
Please note, downloads may be blocked by popup blockers


  • Low VOC and almost odourless and dries quickly, especially suited on normal surfaces such as lounges, halls, rooms, bath's kitchen's and bedrooms.  Also suitable for exterior use.
  • Suitable for application to new concrete, plaster or asbestos cement, No primer required but, recommended to ensure stability.
  • Also suitable for application to previously painted surfaces.
  • May be applied to wood, metal and enamel surfaces provided that these surfaces have been prepared properly and painted with a quality primer and/or undercoat.


  • Manufacturing from 100% pure acrylic binders.
  • Easy application through use of brush, roller or spray gun and dries quickly; two coats can be applied in one day
  • The product does not yellow as traditional High Gloss and Eggshell Enamel.
  • Through its high pigmentation it has exceptional coating capacity, which results in saving on labour and material
  • It yields a luxurious coating with a beautiful Velvet appearance.
  • The product is water-based, therefore cleaning of equipment performed at low cost.
  • Very high Titanium Dioxide content which leads to high opacity and covering power.

Disclaimer: The technical information contained in this document are given in good faith and are meant to be used as a guideline by the specifier or user. Whilst we are confident about the quality of our products, we cannot accept any liability for the incorrect use or application of our products. Surface preparation forms an integral part of the scope of works and it is expected that the highest standards are maintained during surface preparation and application, to ensure that our products perform as intended. Always ensure to use the same product batch numbers, refrain from doing spot touch-ups and paint surfaces from corner to corner to prevent colour and sheen variance. As technology may change over time we reserve the right to change products to keep up with changes in raw materials or product trends without pre notice. Although we will always privail to keep clients informed about changes to be made, but cannot bind ourself to such notes Please ensure the use of the latest Technical Data Sheet.