Texture Fine

Tuftex Fine Texture - PR1238

Tuftex Fine Texture is based on and strengthened by a mica, silica and marble aggregate which ensure a durable and high quality product.

 
 
Product Rating:

Data

Product Code: PR 1238
Application: Roller & Brush
Appearance: Low Sheen
Spread Rate: 5 - 6 m2/l per coat @ 90µm DFT
Packaging: 1L, 5L & 20L
Colours: As per Standard Colour Card.
Guarantee: 12 Years

Tools & Resources

Download Data Sheet  |  Download MSDS  |  Colour Chart  |  Paint calculator  |  Get Adobe Reader
Please note, downloads may be blocked by popup blockers

Description

  • Ideal as a finish for exterior and interior new work or previously painted concrete, plaster and cement. Recommended for exterior and interior surfaces where hair-line cracks are present and a fine texture is required. 
  •  Yields an exceptional exterior durability with a weather-resistant finish which makes it ideal for use in large building projects and houses. Can be used on properly primed wood and metal surfaces.

Features

  • Impa Tuftex Fine contains a special bonding element that enhances its spreading rate.
  • It has an exceptionally low to matt sheen finish, which yields low dust-retention and ensures that the surface can be kept clean easily through rinsing with clean water.
  • It resists the most severe weather conditions like rain and UV sunlight.
  • Tuftex Fine will not lose its flexibility on ageing due to the silica based formulation.
  • A colour tinted in Tuftex Fine is light fast
  • The increased numbers of marble and mica particles provide Tuftex Fine with double the body acrylic coatings.
  • Tuftex Fine covers hairline cracks in one coat and leaves at least 50% more dried film than conventional paint.
  • For best results two coats are recommended.

Disclaimer: The technical information contained in this document are given in good faith and are meant to be used as a guideline by the specifier or user. Whilst we are confident about the quality of our products, we cannot accept any liability for the incorrect use or application of our products. Surface preparation forms an integral part of the scope of works and it is expected that the highest standards are maintained during surface preparation and application, to ensure that our products perform as intended. Always ensure to use the same product batch numbers, refrain from doing spot touch-ups and paint surfaces from corner to corner to prevent colour and sheen variance. As technology may change over time we reserve the right to change products to keep up with changes in raw materials or product trends without pre notice. Although we will always privail to keep clients informed about changes to be made, but cannot bind ourself to such notes Please ensure the use of the latest Technical Data Sheet.